HSP’s Hose Couplings are designed and manufactured in house
Supplied with a Metric or Imperial Test Point:
Imperial 5/8″ BSF Range – HSP1720-4,5,6,8,10,12,16,20
Metric M16x2.00 Range -HSP1720-4M,5M,6M,8M,10M,12M,16M,20M
The O.R.F.S / UNF Hose Test Coupling is to introduce an in-line Test Point to any system at any point. Most commonly the
coupling is installed via the swivel female end supplied with ‘O’ ring seal to a fixed male adaptor from a manifold then a female hose end is connected to the male end of the coupling to continue the circuit. The test points have an M16 x 2 or 5/8 BSF thread in- line with ISO15171-2 and are compatible with any test equipment from other manufacturers using ISO15171-2 standards. Test points are installed into the hydraulic system hardware and can be used with test hoses and probes. The equipment is used to obtain pressure checks during service and fault finding. Probes may be connected and disconnected at full system pressure without fluid loss or ingress of dirt.
|Working Pressure||up to 600 Bar|
|Material||Zinc plated steel body|